Advertisement
Quick Links
Models/Modelos/Modèles
9159-DST & 9959-DST
Series/Series/Seria
TRINSIC
®
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your
Delta
faucet you will need:
®
• To READ ALL the instructions completely before
beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
Delta
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet
Delta
facilement, vous devez:
®
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
70529
70529
1
HIGH-RISE PULL-DOWN KITCHEN
AND BAR / PREP FAUCETS
LLAVES DE AGUA ELEVADAS,
DESLIZABLES HACIA ABAJO,
PARA COCINAS Y BARES / PREP
ROBINET À COL DE CYGNE ET
BEC-DOUCHETTE POUR ÉVIER
DE BAR OU D'ÎLOT DE CUISINE
9/4/15 Rev. D
Advertisement
Related Manuals for Delta 9959-DST series
Summary of Contents for Delta 9959-DST series
- Page 1 Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta faucet you will need: ® • To READ ALL the instructions completely before beginning.
- Page 2 Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.
- Page 3 ▲Especifíque el Acabado parts of the wand assembly. ▲Précisez le fini Sistema de protección contra el contraflujo Su llave de agua tipo deslizable Delta tiene un sistema de RP71655▲ protección contra el contraflujo, incorporado, que ha sido Kitchen Spout probado para cumplir con los requisitos de ASME A112.18.3 y Assembly ASME A112.18.1 / CSA B125.1.
- Page 4 Mount Faucet to Deck Your faucet is designed for a hole diameter of 1 3/8" Secure faucet to sink with washer and mounting nut (1). Tighten securely by hand. Using a Phillips +/- 1/4" (35 mm +/- 6 mm) and a deck thickness of up screwdriver, tighten locking screws (2).
- Page 5 OPTIONAL / OPCIONAL / FACULTATIVE Optional Escutcheon Installation Hose Installation For optional installations using the 10 1/2" escutcheon, order Leave blue clip (1) installed on hose to prevent from being pulled into spout during RP64070 (specify finish) not supplied. Place the 10 1/2" installation.
- Page 6 Loop tubing created. Delta is not responsible for tubing that is l Tubing is cut too short: buy a coupling union and a (2) if it is too long. Note: Recommended tubing...
- Page 7 Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el corte boca abajo. esté recto. Custom Fit Connections - Plastic Sleeve Installation Instructions 1.
- Page 8 Maintenance If faucet exhibits very low flow – Unscrew hose from spray head and clean debris. Turn on hot and cold water supplies (1). Pull the hose assembly (2) out of the spout. If faucet leaks from under handle or from spout outlet – Insert a small Be sure to hold the end of the hose down into the sink and turn faucet handle (3) to screwdriver into slot (2) in button (3) and remove.