Table of Contents
Advertisement
Technical Information
You can adjust this TV so that the screen automatically adjusts to the optimum contrast of light and dark according
to the brightness of your room. This function reduces eyestrain and the power consumption of this TV.
Set "Eco Mode"
Make sure not to block the Eco Sensor on front of the TV (P. 6, 7)
To fully reduce eyestrain and the power consumption of this TV. Set to the following functions.
Eco Mode: On or Demo (P. 43)
Smart Picture: On (P. 40)
Using "Demo" in "Eco Mode", you can display the effect of the "Eco Mode" on the screen
HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI CEC enabled
devices with a single remote. CEC (Consumer Electronics Control) is an optional protocol used in HDMI.
HDMI CEC on this TV is compliant with "High-Definition Multimedia Interface Specification".
The TV does not support HDMI CEC functions that are not listed below.
The TV does not guarantee to support use of all HDMI CEC enabled devices.
Devices that are not enabled to HDMI CEC cannot be controlled with this TV.
Control the TV using the HDMI CEC enabled device
Turn the TV on and switch to the video source of the operating device.
Switch to the video source of the operating device.
Turn the TV off with the HDMI CEC enabled device you are viewing.
* For operating instructions of the device, refer to the device's manual.
Control the HDMI CEC enabled device using the TV
Turn off the operating device by turning off the TV.
* Some device may not support this function. For more details refer to the device's manual.
Send status of the TV to the HDMI CEC enabled device
When switching the TV's external input or channel.
When switching the TV's menu language.
* Information regarding behaviour of the device when status is received, refer to the external device's manual.
Turning On / Off HDMI CEC:
Set HDMI CEC
* Factory default setting is "On".
If "HDMI CEC" does not work correctly:
When HDMI CEC enabled device is connected to EXT-1 or EXT-2 with SCART cable and EXT-5 or EXT-6 (or
EXT-7 of LT-42ED91G) with HDMI cable, you may not be able to control TV's external input. To solve the
problem set "HDMI CEC" to "Off".
50
What is "Eco Mode"?
"Eco Mode" (P. 43)
g
Eco Mode
Dark
What is "HDMI CEC"?
"HDMI Setting" (P. 45)
g
Light
Advertisement
Table of Contents
