Basic Connections - JVC LT-37ED91G Instructions Manual

Basic connections

Please read the user manuals of each device carefully before setup.
It is necessary to connect an aerial to watch TV.
Connect with other devices
After all the connections have been made, insert the plug into an AC outlet.
Power requirements
Connect the power cord only to a 220 - 240 V, 50 Hz AC
outlet.
When attaching the TV to the wall, use the
optional JVC wall mounting unit
Consult a qualified technician.
See the included manual on mounting procedures.
JVC assumes no responsibility for damage due to
improper mounting.
Mounting holes for wall mounting unit:
LT-42ED91G:
M5 x 4, 400 mm x 200 mm
Depth of screw hole is 12 mm from the surface of the TV.
LT-37ED91G/T:
M5 x 4, 200 mm x 200 mm
Depth of screw hole is 10 mm from the surface of the TV.
10
"Connecting external devices" (P. 12)
g
Connect the aerial
Care when setting
AERIAL
Installation requirements
Place the TV on a flat and stable location.
To avoid overheating, ensure the unit has ample
room.
200 mm
150 mm 50 mm
To prevent the TV from falling, thread the belt
through the hole on the back of the stand and
secure it to the TV rack, etc.
Belt and screw (not provided)
150 mm 50 mm
Hole