Table of Contents
Advertisement
Problem
Remote control stops
working
Aspect ratio changes
unintentionally
PC screen alignment is
off
Black or white dots
appear on the screen
Enters "100Hz Clear
Motion Drive"
demonstration when
watching TV
Poor picture quality
Strange picture when
using an external
device
Poor sound
No sound from the
audio component
Some functions do not
work
Actions
Unplug TV, several minutes later plug it in again.
Press "
" to return to your settings.
Adjust the "PC Position".
LCD panels use fine dots ("pixels") to display images.
While more than 99.99% of these pixels function properly, a
very small number of pixels may not light, or may light all the
time.
Please understand that this is not a malfunction.
Set "Auto Demonstration" to "Off".
Change the "Picture Mode" setting.
Unnatural colour >>> Adjust "Colour" and "Bright-1".
Check your "Colour System".
Noise >>> Set to the following functions.
Picture Mode: Standard
Super DigiPure: Max
Dull picture >>> Set to the following functions.
Picture Mode: Bright
Super DigiPure: Min
If you connected S-Video output device, check the "S-In" setting.
If the top of the image is distorted, check the video signal quality
itself.
If movement appears unnatural when receiving a signal from a
DVD player etc., with 576p (625p), change the output setting of
the external device to 576i (625i).
Adjust the "MaxxAudio" setting.
If receiving a poor signal in "Stereo/ t·u", switch to "v"
(monaural).
Change the broadcasting system using "Manual".
Audio signals received from EXT-5 and EXT-6 (and EXT-7 of
LT-42ED91G) cannot be sent to the AUDIO OUT terminal.
It is not a malfunction. Depending on the situation, some
function items will be displayed in gray colour and will not work.
Page
–
32
45
–
45
39
39
40
39
40
39
40
29
–
–
41
41
21
–
38
47
Advertisement
Table of Contents
