ProForm SPACE SAVER PFEL59107.0 User Manual page 8

6. Apply a generous amount of the included grease
6
to the Upper Body Axle (71). Insert the Upper 65
96 85
Body Axle into the Upright (10). Be careful not
Grease
to damage the Upper Wire Harness (65).
71
Apply a small amount of grease to a Wave
10
Washer (101). Slide the Wave Washer onto the
Grease 101
72
left end of the Upper Body Axle (71).
Identify the Left Upper Body Leg (24), which is
96
marked with sticker, and orient it as shown.
85
101
Slide the Left Upper Body Leg onto the left side
of the Upper Body Axle (71).
Attach the Left Upper Body Leg (24) to the Upper
24
Body Axle (71) with an M8 x 19mm Button
Screw (85) and an M8 x 23mm x 2mm Washer
(96).
Repeat this step for the Right Upper Body
Leg (72).
7. Attach the Left Upper Body Arm (22) to the Left
7
Upper Body Leg (24) with three M8 x 14mm
23
Button Screws (84) and three M8 Split
Washers (97).
Attach the Right Upper Body Arm (23) in the
same way.
22
97
84
97
24
8