Assembly - ProForm SPACE SAVER PFEL59107.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own phillips screwdriver
adjustable wrench
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number
following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the parts bag, check to see if it has been preassembled.
Wave Washer Large Wave
(101)–2 Washer (102)–4
M10 Split
Washer (99)–2
M8 x 19mm Button
Screw (85)–6
M8 x 45mm Button
Screw (90)–6
, and rubber mallet
M8 Split
Washer (97)–16
M10 Nylon
Screw (78)–6
Locknut (82)–2
M8 x 23mm Button
Screw (86)–4
.
M8 Washer M8 x 23mm x
(95)–4 1mm Washer
(31)–4
M4 x 16mm M4 x 16mm
Round Head
Screw (80)–21
M10 x 78mm Carriage Bolt (92)–2
M10 x 80mm Button Screw (93)–2
5
,
M8 x 23mm x
2mm Washer
(96)–8
M8 x 14mm Button
Screw (84)–6