Cornelius ED-250 BCP Operator's Manual page 7

Light Color
Step 2. Set portion
level for each size Yellow
cup
Step 3. If desired,
set the extra ice Red
portion adjustment
NOTE: Consult store manager on desired ice level in each size cup.
CAUTION: The gate closes immediately when the toggle switch is moved to the auto position. Do not
place fingers or foreign objects into the ice chute when operating the toggle switch.
Enduro Ice/Beverage Dispenser Operator's Manual
Explanation
Extra Ice Portion Adjust-
ment
Extra Ice Portion Adjust-
ment
5
Actions That Can Be Taken
To enter Portion Adjustment Mode
simultaneously press INCREASE
and DECREASE twice.
Press and hold CUP SIZE to be ad-
justed and while pressing IN-
CREASE or DECREASE to change
portion size (5 millisecond per
pulse).
NOTE: Make sure the light blinks as
the buttons are pressed.
The light will flash green for 5 sec-
onds. While the green light is flash-
ing the ice portion can be tested by
pressing the CUP SIZE again.
To exit Portion Adjustment Mode si-
multaneously press INCREASE and
DECREASE two times.
To enter Portion Adjustment Mode
simultaneously press INCREASE
and DECREASE three times.
Press and hold CUP SIZE to be ad-
justed and while pressing IN-
CREASE or DECREASE to change
portion size (5 millisecond per
pulse).
NOTE: Make sure the light blinks
as the buttons are pressed.
To exit Extra Ice Portion Adjustment
Mode simultaneously press IN-
CREASE and DECREASE.
620916502OPR