Selecting Your Network - Motorola MTM800 Feature User Manual

• If the radio is powered on via the ignition, it can be turned
off via the ignition or the On/Off pushbutton.
You will see the
The terminal powers On and Off without visible and audible
notification if Covert Mode is activated. (Refer to "Covert Mode" on
page 25.)
Uninstalling the Radio
Unlocking the MTM800
Your MTM800 may be locked at power up. To unlock, see
"How to unlock the MTM800" on page 81.

Selecting Your Network

Before you start operating your MTM800, you can select the
network you want your MTM800 to be registered to. For
detailed information, see "Network" on page 92.
Powering On with activated Transmit Inhibit
If the terminal has been powered Off with activated Transmit
Inhibit (see "Setting Transmit Inhibit (TXI) Mode" on page 93)
the TXI Mode remains active.
When powering On with activated TXI
Mode the user will be asked whether to
leave the TXI Mode or not.
Press the Yes soft key (see "The Soft Keys"
on page 14) if you want to deactivate the TXI Mode — e.g. if
you have left the RF sensitive area where the TXI Mode was
recommended. If the MTM800 was previously used in
Trunked Mode (TMO), it will register to the network.
12
message.
Powering Off
OPTION 1:
Before disconnecting the 13.2V main power
supply from the radio:
1. Switch off the radio.
2. Wait for a minimum of 4 seconds after the
radio Off Switch is released.
Disconnect the 13.2V main power supply.
OPTION 2:
Turn off the main power supply WITHOUT
switching OFF the radio.
Exit TXI?
Yes No