Chevrolet Malibu Hybrid 2008 Owner's Manual page 297

3. Place the tire sealant and compressor kit on the
ground and unwrap the sealant/air hose (C) from
the side of the compressor.
4. Remove the valve stem cap from the flat tire by
turning it counterclockwise.
5. Attach the sealant/air hose (C) onto the tire valve
stem. Turn it clockwise until tight.
Make sure the sealant and compressor kit on/off
switch (F) is in the O (off) position.
6. Remove the air compressor accessory plug (G)
from the unit.
7. Plug the air compressor accessory plug (G) into
an accessory power outlet in the vehicle. See
Accessory Power Outlet(s) on page 3-19 for
more information.
Do not slam door or close window on the
compressor accessory plug cord.
CAUTION:
{
Idling the engine in a closed-in place or with
the climate control system off can cause
deadly carbon monoxide (CO). See Engine
Exhaust on page 2-31.
8. Start the vehicle. See Starting the Engine
(Automatic Engine Start/Stop) on page 2-20
for more information. The vehicle must be running
while using the air compressor.
CAUTION:
{
Overinflation could cause the tire to rupture,
and you or others could be injured. Be sure to
read the inflator instructions, and inflate the
tire to its recommended pressure. Do not
exceed 36 psi (248 kPa).
9. Push the On/Off switch (F) to the I (on) position.
The sealant and compressor kit injects sealant
and air into the tire. Sealant could leak from
the puncture hole until the vehicle is driven and
the hole has sealed.
The pressure gage (D) will initially show a high
pressure while the compressor injects the sealant
into the tire. Once the sealant is completely
dispersed into the tire, the pressure will quickly
dropped and start to rise again as the tire
inflates with air.
5-69