Chart Application Controls - Raymarine Dragonfly-4 DV Installation And Operation Instructions Manual

• C-MAP Essentials
• C-MAP 4D MAX
• *C-MAP 4D MAX+
Note: *C-MAP 4D MAX+ cartography will work
with Dragonfly ® products however the '+' features
will not be available.
Chart application

9.3 Chart application controls

The Chart application consists of 2 modes: Motion
mode and Cursor mode. The behavior of some
controls are dependent upon mode. Options and
settings can also be accessed from the Chart context
menu.
Motion mode
Motion mode is the default Chart application mode.
In Motion mode the boat symbol remains centered
onscreen and the Chart area moves around the boat
symbol.
In Motion mode the controls behave as follows:
• pressing the + button ranges in.
• pressing the – button ranges out.
• pressing the Ok button opens the Chart application
menu.
• pressing the Back button opens the View
switcher.
• pressing any of the Directional controls enters
Cursor mode.
Cursor mode
In Cursor mode the Directional controls are used
to move around the Chart area. When the cursor
reaches the edge of the screen the Chart area will
pan in that direction.
In Cursor mode the controls behave as follows:
• using the Directional controls in any direction
pans the chart area in that direction.
• pressing the + button ranges in.
• pressing the – button ranges out.
• pressing the Ok button opens the context menu.
• pressing the Back button returns the application
to Motion mode.
Menus and dialogs
73