Learning Resources - Raymarine Dragonfly-4 DV Installation And Operation Instructions Manual

Inserting a MicroSD card
1
With the card reader's cover open:
1. Insert the card with the contacts facing down.
2. Gently press the MicroSD card all the way into
the card reader slot.
3. Fully close the card reader cover.
Important: When closing the cover ensure that it
is fully pushed in and sealed all the way around
the edge, this will provide the weatherproof seal.
Removing a MicroSD card
1
1. On display products select Eject SD Card from
the Shortcuts page.
2. Open the card reader's cover.
3. Pinch the protruding edge of the MicroSD card
between your index finger and thumb and pull the
card clear of the card reader slot.
4. Fully close the card reader cover.
Important: When closing the cover ensure that it
is fully pushed in and sealed all the way around
the edge, this will provide the weatherproof seal.
58

7.11 Learning resources

Raymarine has produced a range of learning
2
resources to help you get the most out of your
products.
D13245-1
2
D13246-1
Dragonfly–4 / Dragonfly–5 / Dragonfly–7 / Wi–Fish