Table of Contents
Advertisement
Removing docomo nano UIM
card
Remove the cover of docomo nano
1
UIM card/microSD card slot (P.26).
Pull the tray straight out from the
2
terminal. (P.32).
Remove the docomo nano UIM
3
card from the tray.
Insert the tray into the terminal
4
and press it straight into the slot.
Be careful about the direction to insert
･
of the tray.
Firmly press until the tray is all the
5
way in, and make sure that there
are no gaps between the terminal
and cover (P.32).
CE mark and FCC ID
Open the docomo nano UIM card
1
slot cover, and insert a fingernail
into the hook at the edge of the
label tray, then pull it out straight.
TYPE: PM-1024-BV
FCC ID: PY7-43153G
Sony Mobile Communications Inc.
4-12-3 Higashi-Shinagawa
Shinagawa-ku, Tokyo
140-0002 Japan
Before Using the Terminal
33
Advertisement
Table of Contents
