❖ Information
You can scan and write data to or from an IC card
・
reader without activating Osaifu-Keitai compatible
application.
These services are available even when the terminal
・
is off. However, they may not be available if the
terminal has been off for a long time or the battery is
too low.
Depending on your installed Osaifu-Keitai
・
compatible application or its settings, your terminal
may not respond when you hover it over an IC card
reader, if the screen is locked or if the backlight or
terminal is off.
You can use Osaifu-Keitai compatible service even
・
when the PIN code for docomo nano UIM card
cannot be unlocked or PIN locked.
Note that when you do not subscribe sp-mode,
・
some functions of Osaifu-Keitai compatible service
may not be available.
Using "
かざしてリンク対応サービ
(Kazashite-Link compatible
ス
service)"
From the Home screen,
1
u
[Settings]
[NFC / Osaifu-Keitai settings]
2
for "Reader/Writer, P2P"
[OK].
NFC Reader/Writer, P2P function is
・
enabled, and
bar.
Hold the NFC / Osaifu-Keitai
3
position over a device with the
NFC module or a smart poster, etc.
Locking Osaifu-Keitai function
Use "NFC / Osaifu-Keitai lock" settings to
restrict the use of Osaifu-Keitai function and
related services.
NFC / Osaifu-Keitai lock is different from
・
screen lock for the terminal, SIM card lock.
From the Home screen,
1
u
[Settings]
[NFC / Osaifu-Keitai settings]
2
[NFC / Osaifu-Keitai lock].
u
[More].
u
u
appears in the status
u
[More].
u
Apps
Tap
119