Table of Contents
Advertisement
Updating software
You need to perform the installation by
･
yourself for updating software. Drag the
u
status bar down
[install].
To change the auto-update setting, from the
･
Home screen,
u
[Software Update]
"Auto download".
When "Auto download" is OFF, perform
･
operation of "When the icon does not appear
in the status bar" (P.222).
When the icon does not appear in the
status bar
Perform the update as follows.
From the Home screen,
1
u
[Settings]
[Software Update]
Download starts.
･
After a message for installation
2
start appears
Installation starts.
･
u
Tap a notification
u
u
[Settings]
[About phone]
u
Tap of
/
u
[About phone]
u
[Update now].
u
[INSTALL].
When the confirmation screen for
■
update appears
Depending on update, a confirmation
screen for performing update appears after
[Update now] is tapped.
Tap
Select a upgrading method.
1
"Perform now (only via Wi-Fi)" :
･
Immediately download the update file
of
via Wi-Fi connection.
"Perform at scheduled time (via Wi-Fi/
･
Xi)"
Wi-Fi connection or Xi/FOMA at the
time that is reserved automatically.
* If downloading via Xi/FOMA is not available,
[Download and install]/
2
u
[Download].
"Download and install" : After
･
downloading is complete, the
installation is performed automatically.
Installation is performed after
approximately 10 seconds even if you
do not tap [OK].
"Download" : Even when downloading
･
update file is complete, the installation
is not performed automatically. To
install, perform installation by yourself.
*
: Download the update file via
"Perform at scheduled time (only via Wi-Fi)"
appears. If you does not set sp
mode), the update cannot be performed
even if [Perform at scheduled time (only via
Wi-Fi)] is tapped. Use Wi-Fi connection.
Appendix/Index
(sp-
モード
222
Advertisement
Table of Contents
