Table of Contents
Advertisement
Pull the tray straight out from the
2
terminal.
With the IC side facing up, place
3
the docomo nano UIM card on the
tray.
Make sure that the cut corner of the
･
card is oriented properly.
Be sure to fit the docomo nano UIM
･
card into the tray so that it does not
shift.
Turn the terminal horizontally and
4
insert the tray with the card and
press it straight into the slot.
Be careful about the direction to insert
･
of the tray.
Firmly press the
5
tray is all the way in, and make
sure that there are no gaps
between the terminal and cover.
Before Using the Terminal
parts until the
32
Advertisement
Table of Contents
