Install The Switch On A Flat Surface - NETGEAR GC728X Hardware Installation Manual

Insight Managed 28-Port Gigabit Ethernet (PoE+) Smart Cloud Switch

Install the Switch on a Flat Surface

The switch ships with four self-adhesive rubber footpads.
To install the switch on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the switch.
The rubber footpads cushion the switch against shock and vibrations. They also provide ventilation
space between stacked switches.
Optional Step 5: Install SFP Transceiver Modules
The following optional procedure describes how to install an optional SFP transceiver module into one of
the SFP ports of the switch.
Note Contact your NETGEAR reseller to purchase these modules. If you do not want to
install an SFP module, skip this procedure.
To install an SFP transceiver module:
1. Insert the transceiver into the SFP port.
2. Press firmly on the flange of the module to seat it securely into the connector.
Installation
25