Using The Control Buttons - Toshiba dynaEdge DE-100 Series User Manual

Table of Contents

Advertisement

Operating Basics
This chapter describes the basic operations of your computer, and
highlights the precautions that must be taken when using it.

Using the Control buttons

The Control buttons on the computer might support the following
operations:
Arrow buttons
Center button
Some of the Control buttons operations described in this section are only
supported in certain applications.
Using the Fingerprint Sensor
Some models are equipped with the fingerprint sensor for the purpose of
enrolling and recognizing fingerprints. Lightly touch and rest your finger on
the fingerprint sensor to recognize fingerprints. During enrollment, you
might need to touch and lift your finger on the sensor repeatedly until setup
is complete.
To add or remove fingerprints:
1.
2.
3.
User's Manual
Click Start -> All Programs -> Synaptics -> Synaptics Fingerprint
Manager.
The Synaptics Fingerprint Manager screen is displayed. Enter the
current account password into the Windows Password field. If no
Windows password has been configured, you will be asked to
configure the new logon password. Then click Next.
Follow the on-screen instructions to finish the setup.
Chapter 4
Press the up/down/left/right button to navigate
within the connected screen.
Up + down: press and hold these two buttons
simultaneously for 5 seconds to lock/unlock the
buttons.
Press this button to select the desired action. It
acts like the ENTER key.
Press and hold this button more than one second
to acts like the ESC key.
4-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynaedge de-10 seriesDynaedge de-105 series

Table of Contents