Toshiba dynaEdge DE-100 Series User Manual page 38

Fingerprint Sensor
Security lock slot
Power button ring
LED
Power button
DC IN/Battery
indicator
Cooling vents
Do not block the cooling vents. Keep foreign metal objects, such as
screws, staples, and paper clips, out of the cooling vents. Foreign metal
objects can create a short circuit, which can cause damage and fire,
possibly resulting in serious injury.
Carefully clean the dust on the surface of the cooling vents using a soft
cloth.
DC IN 19V jack
Battery lock
User's Manual
This sensor enables you to enroll and sign in with
a fingerprint.
Some models are equipped with a Fingerprint
Sensor.
A security cable can be attached to this slot and
then connected to a desk or other large object in
order to deter theft of the computer.
The Power button ring LED normally glows white
when the computer is turned on. However, if you
turn off the computer into Sleep Mode, this LED
blinks white.
Press this button to turn the computer's power on
or off.
The DC IN/Battery indicator shows the
condition of the DC IN and the battery charge
status. White indicates that the battery is fully
charged while the power is being correctly
supplied from the AC power adaptor.
Refer to the Power Condition Descriptions
section for more information on this feature.
The cooling vents help the processor to avoid
overheating.
The AC adaptor connects to this jack in order to
power the computer and charge its internal
batteries. Note that you must only use the model
of AC adaptor supplied with the computer at the
time of purchase. Using the wrong AC adaptor
can damage the computer.
Slide the battery lock to release the battery pack
ready for removal.
3-4