Toshiba RAS-B10SKVP-E Service Manual page 92

No. Part name
ƒ
Electric parts
box assembly
More user manuals on
Procedures
1) Follow the procedure up to 4) in
2) Remove screw of earth lead attached to
the end plate of the evaporator.
3) Remove the lead wire cover, and remove
connector (5P) for the fan motor and
connector (5P) for the louver motor from
the electric parts box assembly.
4) Pull out TC and TCJ sensors from sensor
holder of the evaporator.
5) Disengage the two claws at the top of the
display unit.
(They can be easily disengaged by
pushing the drain pan above the claws
and at the same time pulling the display
unit toward you.)
6) Remove the fixing screw that secures the
electric parts box assembly, and remove
the assembly.
<How to assemble the electric parts box>
1) Hook the top part of the electric parts box
assembly onto the claws on the back
body, and secure it using the fixing screw.
Now attach the display unit.
Connect the connectors for the fan motor
and louver motor.
2) Secure the grounding wire using the fixing
screw.
Insert the TC and TCJ sensors into the
sensor holder.
* Be absolutely sure to loop the grounding
wire, TC and TCJ sensor leads once at
the bottom.
ManualsBase.com
‚
above.
TC sensor TC sensor
Earth screw Earth screw
TCJ sensor TCJ sensor
TC sensor TC sensor
Earth screw Earth screw
– 92 –
Remarks
TCJ sensor
Lead wire cover Lead wire cover
Fixing screw
Push the Push the
drain pan drain pan
Pull the display Pull the display
unit toward you unit toward you
Fan motor Fan motor
connector connector
Louver moter Louver moter
connector connector
Make absolutely sure that
the leads form a loop