Quality of Service Commands on the Cisco IOS XR Software
Examples
In the following example, all TCP packets belong to class class1:
RP/0/RP0/CPU0:router(config)# class class1
RP/0/RP0/CPU0:router(config-cmap)# match protocol tcp
Related Commands
Command
class-map, on page 12
match access-group, on page 32
match mpls experimental topmost, on
page 48
match qos-group, on page 56
OL-23235-03
Description
Defines a traffic class and the associated rules that match packets to
the class.
Identifies a specified access control list (ACL) number as the match
criteria for a class map.
Identifies specific three-bit experimental (EXP) field values in the
topmost Multiprotocol Label Switching (MPLS) label as match
criteria for a class map.
Identifies specific quality-of-service (QoS) group values as match
criteria in a class map.
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
match protocol
55