Cisco CRS Command Reference Manual page 132

show policy-map interface
interface-path-id
input
output
member
Command Default
No default behavior or values
Command Modes
EXEC
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
126
Quality of Service Commands on the Cisco IOS XR Software
Physical interface instance. Naming
notation is rack/slot/module/port
and a slash between values is
required as part of the notation.
• rack—Chassis number of the
rack.
• slot—Physical slot number of
the line card.
• module—Module number. A
physical layer interface
module (PLIM) is always 0.
• port—Physical port number
of the interface.
Note In references to a
Management Ethernet
interface located on a
route processor card, the
physical slot number is
alphanumeric (RP0 or
RP1) and the module is
CPU0.
Example: interface
MgmtEth0/RP1/CPU0/0.
For more information about the
syntax for the router, use the
question mark (?) online help
function.
(Optional) Displays per class
statistics on inbound traffic for the
specified policy map and interface.
(Optional) Displays per class
statistics on outbound traffic for the
specified policy map and interface.
(Optional) Specifies the bundle
member's interface.
OL-23235-03