Hp 5700-32Xgt-8Xg-2Qsfp+/Hp 5700-32Xgt-8Xg-2Qsfp+ Taa - HP FlexFabric 5700-48G-4XG-2QSFP+ TAA Installation Manual

for the switch as needed. In
information about installing and removing a power supply, see
The HP 5700-40XG-2QSFP+ and HP 5700-40XG-2QSFP+ TAA switches also come with the fan tray
slots empty. You must install two fan trays of the same model for the switch. In
LSWM1FANSC fan trays are installed. For more information about installing and removing a fan tray,
see "Installing/removing a fan
Figure 41 Left side panel
(1) Primary grounding point
HP 5700-32XGT-8XG-2QSFP+/HP
5700-32XGT-8XG-2QSFP+ TAA
Figure 42 Front panel
(1) 1/10GBase-T autosensing Ethernet port
(3) SFP+ port
(5) QSFP+ port
(7) System status LED (SYS)
Figure 43 Rear panel
(1) Grounding screw (auxiliary grounding point 2)
(3) Fan tray slot 1
(5) Power supply slot 1
(7) Console port
Figure 40, two 300 W AC power supplies are installed. For more
tray."
(2) Auxiliary grounding point 1
(2) 1/10GBase-T autosensing Ethernet port LED
(4) SFP+ port LED
(6) QSFP+ port LED
(2) Management Ethernet port
(4) Fan tray slot 2
(6) Power supply slot 2
(8) LINK LED for the management Ethernet port
39
"Installing/removing a power supply."
Figure 40, two