3.
Use Telnet, web, or SNMP to access the IRF fabric from the network management station. (See HP
FlexFabric 5700 Switch Series Fundamentals Configuration Guide.)
4.
Verify that you can manage all member switches as if they were one node.
5.
Display the running status of the IRF fabric by using the commands in
Table 6 Displaying and maintaining IRF configuration and running status
Task
Display information about the IRF fabric.
Display all members' IRF configurations that take
effect at a reboot.
Display IRF fabric topology information.
NOTE:
To avoid IP address collision and network problems, configure at least one multi-active detection (MAD)
mechanism to detect the presence of multiple identical IRF fabrics and handle collisions. For more
information about MAD detection, see
Command
display irf
display irf configuration
display irf topology
HP FlexFabric 5700 Switch Series IRF Configuration Guide
34
Table
6.
.