Table of Contents
Advertisement
Introduction
Introduction
This document describes what you need to know to get started using a FortiGate-7000 product. Also included are
details about CLI commands that are specific to FortiGate-7000 products.
This FortiOS Handbook chapter contains the following sections:
FortiGate-7000 overview
Getting started with FortiGate-7000
7000 product.
FortiGate-7000 Load balancing commands
What's new in for FortiGate-7000 v5.4.5
The following new features have been added to FortiGate-7000 v5.4.5.
M1 and M2 interfaces can use different VLANs for heartbeat traffic (408386)
The M1 and M2 interfaces can be configured to use different VLANs for HA heartbeat traffic.
The following command now configures the VLAN used by the M1 interface (default 999):
config system ha
set hbdev-vlan-id 999
end
The following new command configures the VLAN used by the M2 interface (default 1999):
config system ha
set hbdev-second-vlan-id 1999
end
GTP load balancing
GTP load balancing is supported for FortiGate-7000 configurations licensed for FortiOS Carrier. You can use the
following command to enable GTP load balancing. This command is only available after you have licensed the
FortiGate-7000 for FortiOS Carrier.
config load-balance setting
set gtp-load-balance enable
end
FSSO user authentication is synchronized
FSSO user authentication is synchronized to all FIM and FPM modules. FSSO users are no longer required to re-
authenticate when sessions are processed by a different FIM or FPM module.
FortiGate-7000
Fortinet Technologies Inc.
provides a quick overview of FortiGate-7000 components.
describes how to get started with managing and configuring your FortiGate-
describes FortiGate-7000 load balancing CLI commands.
What's new in for FortiGate-7000 v5.4.5
8
Advertisement
Table of Contents
