Setting The Time; Entering An Address - Buick Lucerne 2006 Manual

Setting the Time

To set the time, do the following:
1. Press the MENU key to enter the configure menu
options, then press the MENU key repeatedly until
the time is selected or select the time screen
button.
2. Press the Hours and Minutes − (minus) and + (plus)
signs to decrease or to increase the time.
See "Setting the Time" under Configure Menu on
page 2-28 for more information.
Entering an Address and Point of
Interest, and Storing Preset
Destinations

Entering an Address

To enter a destination by entering the city name first, do
the following:
O
1. Press the (power) knob to turn the system on.
2. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 2-4 for more
information.
3. A caution may appear. Select the OK screen button
to proceed.
If the radio is already on with a map disc inserted,
press the DEST hard key.
2
4. Select the Address Entry screen button.
5. Select the state/province screen button, if needed,
to change the current state or province. Enter the
name or enter the two-letter abbreviation. A list
will display or select the List screen button
and select the state or province.
6. Select the City name button and start entering the
city name.
If five or less names are available, a list will display.
If more than five are available, the List screen
button will have a number in it that represents the
number of available cities. Select this button to view
the list and select a city.
7. Once a city has been selected the Street name
category will automatically be selected for entry.
Do not enter directional information or street type.
Use the space symbol screen button (
between street or city names. For example, the
street name N. Royal Oak Rd. should be entered as
U
royal oak. Use the backspace (
button if an incorrect character has been entered.
U
)
V
) screen
1-7