Using Your Stored Preset Destinations - Buick Lucerne 2006 Manual

8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See "Point of Interest (POI)" under Destination on
page 2-13 for more information.
Storing Preset Destinations
1. Press the O (power) knob to turn the system on.
2. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 2-4 for more
information.
3. A caution may appear. Select the OK screen button
to proceed.
If the radio is already on with a map disc inserted,
press the DEST hard key.
Enter a destination. See Destination on page 2-13
for more information on how to enter a destination.
4. Select the Map screen button after entering
the destination.
5. Select the Mark screen button from the map screen
to add the current final destination as a preset
destination.
The address book screen will appear.
6. Select the Name screen button. An alpha-keyboard
will display. Enter the name.
7. Press and hold one of the screen buttons at the
bottom of the screen until the name appears in
the screen button on the display.
The name will appear in that preset destination
screen button and is now available to select from
the Destination Entry screen. See "Using Your
Stored Preset Destinations" next in this section to
select it as a destination.
See "Adding or Changing Preset Destinations"
under Destination on page 2-13 for more information
on how to add preset destinations.

Using Your Stored Preset Destinations

These destinations are available for selection while
driving.
1. Press the O (power) knob to turn the system on.
2. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 2-4 for more
information.
1-9