Table of Contents
Advertisement
3. A caution may appear. Select the OK screen button
to proceed.
If the radio is already on with a map disc inserted,
press the DEST hard key.
4. Select one of the available preset destination
screen buttons. A map screen, with the destination
marked, will appear.
5. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
6. Select the Start Guidance screen button. You are
now ready to start your route.
See "Preset Destination" under Destination on page 2-13
for more information.
Canceling Guidance
Guidance will be canceled once you arrive at your final
destination. To cancel guidance prior to arrival at the
final destination, do the following:
1. Press the DEST hard key.
2. Select the Cancel Guidance screen button.
3. A pop-up confirmation will appear. Select OK to
cancel guidance or Cancel to cancel the request.
1-10
Guidance Volume
To adjust the volume of voice guidance prompts, do the
following:
1. Press the MENU hard key to enter the menu
options, then press the MENU key repeatedly
until Nav is selected or select the Nav screen
button.
2. Select the Voice Prompt screen button.
3. Select the On screen button if voice guidance is
not on.
4. Select the + (plus) or – (minus) screen buttons to
increase or to decrease the volume of the voice
prompts. The system will respond with the adjusted
voice level.
See "Voice Prompt " under Configure Menu on
page 2-28 for more information.
Cleaning the Video Screen
When cleaning the video screen, use only a soft clean
cotton cloth dampened with clean water.
Advertisement
Table of Contents
