Beeper - Accu-Chek Guide User Manual

Meter Settings
5

Beeper

Beeper
The beeper prompts you:
• when a test strip is inserted.
• to apply blood or control solution to the test strip.
• when enough blood or control solution is drawn into the test strip.
• when the blood glucose or control test is complete.
• when the meter is turned on.
• when a button is pressed.
• when it is time to perform a test (if Reminders or Post Meal reminders are On).
• when the batteries are inserted.
• when there are no stored blood glucose results or there is an invalid record in the logbook.
• when there are no errors in the error log.
• if an error occurred (even if the beeper is off, it still beeps for an error).
1
Turn the meter on by briefly
pressing . From Main Menu,
press to highlight Settings.
Press .
46
52926_07414587001_EN.indb 46
2
to highlight Beeper.
Press
Press .
3
to highlight On
Press or
or Off. Press to move to
the option.
Press to set the option and
return to the previous menu.
6/2/16 2:53 PM