Performing A Blood Glucose Test With Blood From Your Fingertip - Accu-Chek Guide User Manual

WARNING
To prevent inaccurate results:
• DO NOT expose test strips to heat, moisture, or humidity. Temperatures outside the required range, as
well as moisture and humidity, can damage the test strips and lead to inaccurate results.
• DO NOT bend, cut, or alter the test strips.
• DO NOT get dirt, food, or other material on the test strip.

Performing a Blood Glucose Test with Blood from Your Fingertip

Refer to the Important Safety Information section at the beginning of this manual.
NOTE
• Before you perform your first blood glucose test, set up the meter correctly.
• You need the meter, a test strip, and a lancing device with a lancet drum loaded to perform a blood
test.
• A blood glucose test cannot be performed while the meter is connected to a PC with a USB cable.
• There are 2 ways to start a blood glucose test.
• Insert a test strip into the meter.
• Turn the meter on by briefly pressing
52926_07414587001_EN.indb 25
Blood Glucose Tests
. Select Test > .
3
25
6/2/16 2:52 PM