Configuring Bfd Support For Ospf For One Or More Interfaces - Cisco Catalyst 9500 series Configuration Manual

Cisco ios xe everest 16.6.x
Hide thumbs Also See for Catalyst 9500 series:
Table of Contents

Advertisement

Configuring Bidirectional Forwarding Detection
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10

Configuring BFD Support for OSPF for One or More Interfaces

To configure BFD on one or more OSPF interfaces, perform the steps in this section.
Before You Begin
OSPF must be running on all participating routers.
The baseline parameters for BFD sessions on the interfaces over which you want to run BFD sessions to BFD
neighbors must be configured. See the Configuring BFD Session Parameters on the Interface section for more
information.
Command or Action
exit
Example:
Device(config-router)# exit
interface type number
Example:
Device(config)# interface
fastethernet 6/0
ip ospf bfd [disable]
Example:
Device(config-if)# ip ospf bfd
disable
end
Example:
Device(config-if)# end
show bfd neighbors [details]
Example:
Device# show bfd neighbors
detail
show ip ospf
Example:
Device# show ip ospf
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
How to Configure Bidirectional Forwarding Detection
Purpose
(Optional) Returns the device to global configuration
mode. Enter this command only if you want to perform
Step 7 to disable BFD for one or more interfaces.
(Optional) Enters interface configuration mode. Enter
this command only if you want to perform Step 7 to
disable BFD for one or more interfaces.
(Optional) Disables BFD on a per-interface basis for one
or more interfaces associated with the OSPF routing
process.
You should use the disable keyword only if you
Note
enabled BFD on all of the interfaces that OSPF
is associated with using the bfd all-interfaces
command in router configuration mode.
Exits interface configuration mode and returns the router
to privileged EXEC mode.
(Optional) Displays information that can help verify if
the BFD neighbor is active and displays the routing
protocols that BFD has registered.
(Optional) Displays information that can help verify if
BFD for OSPF has been enabled.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents