Configuring Bgp Filtering With Route Maps - Cisco Catalyst 9500 series Configuration Manual

Configuring IP Unicast Routing
Step 13
Step 14
Step 15
Step 16

Configuring BGP Filtering with Route Maps

Procedure
Step 1
Step 2
Step 3
Command or Action
end
Example:
Device(config)# end
show ip bgp
Example:
Device# show ip bgp
show ip bgp neighbors
Example:
Device# show ip bgp neighbors
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Command or Action
configure terminal
Example:
Device# configure terminal
route-map map-tag [permit | deny]
[sequence-number]
Example:
Device(config)# route-map
set-peer-address permit 10
set ip next-hop ip-address [...ip-address]
[peer-address]
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
Configuring BGP Filtering with Route Maps
Purpose
Returns to privileged EXEC mode.
Verifies the reset by checking information about the
routing table and about BGP neighbors.
Verifies the reset by checking information about the
routing table and about BGP neighbors.
(Optional) Saves your entries in the configuration file.
Purpose
Enters the global configuration mode.
Creates a route map, and enter route-map
configuration mode.
(Optional) Sets a route map to disable next-hop
processing
131