Cisco Catalyst 9500 series Configuration Manual page 156

Monitoring and Maintaining BGP
clear ip bgp *
clear ip bgp peer-group tag
show ip bgp prefix
show ip bgp cidr-only
show ip bgp community [community-number]
[exact]
show ip bgp community-list
community-list-number [exact-match]
show ip bgp filter-list access-list-number
show ip bgp inconsistent-as
show ip bgp regexp regular-expression
show ip bgp
show ip bgp neighbors [address]
show ip bgp neighbors [address]
[advertised-routes | dampened-routes |
flap-statistics | paths regular-expression |
received-routes | routes]
show ip bgp paths
show ip bgp peer-group [tag] [summary]
show ip bgp summary
The bgp log-neighbor changes command is enabled by default. It allows to log messages that are generated
when a BGP neighbor resets, comes up, or goes down.
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
146
Resets all BGP connections.
Removes all members of a BGP peer group.
Displays peer groups and peers not in peer groups to
which the prefix has been advertised. Also displays prefix
attributes such as the next hop and the local prefix.
Displays all BGP routes that contain subnet and supernet
network masks.
Displays routes that belong to the specified communities.
Displays routes that are permitted by the community list.
Displays routes that are matched by the specified AS path
access list.
Displays the routes with inconsistent originating
autonomous systems.
Displays the routes that have an AS path that matches the
specified regular expression entered on the command line.
Displays the contents of the BGP routing table.
Displays detailed information on the BGP and TCP
connections to individual neighbors.
Displays routes learned from a particular BGP neighbor.
Displays all BGP paths in the database.
Displays information about BGP peer groups.
Displays the status of all BGP connections.
Configuring IP Unicast Routing