Removing A Pc Card Or Blank - Dell Latitude D400 User Manual

FILE LOCATION: S:\SYSTEMS\Pebble\UG\A00\English\pccards.fm
Hold the card with its orientation symbol pointing into the slot and
1
the top side of the card facing up. The latch may need to be in the "in"
position before you insert the card.
Slide the card into the slot until the card is completely seated in its
2
connector.
If you encounter too much resistance, do not force the card. Check the
card orientation and try again.
The computer recognizes most PC Cards and automatically loads the
appropriate device driver. If the configuration program tells you to load the
manufacturer's drivers, use the floppy disk or CD that came with the PC
Card.

Removing a PC Card or Blank

NOTICE: Use the PC Card configuration utility
a card and stop it from functioning before you remove it from the computer. If
you do not stop the card in the configuration utility, you could lose data. Do not
attempt to eject a card by pulling its cable, if one is attached.
Press the eject button.
1
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 2 9 / 0 3 – F O R P R O O F O N LY
on the taskbar to select
83
Using PC Cards