Rheem Pronto 012 Owner's Manual And Installation Instructions page 9

HOW DO I KNOW IF THE WATER HEATER IS INSTALLED CORRECTLY?
Installation requirements are

by a qualified person, and

in accordance with the installation instructions, and

in compliance with Standards AS/NZS 3500.4, and either AS 5601 or AS/NZS 5601.1 as applicable under
local regulations, and all local codes and regulatory authority requirements.
VICTORIAN CUSTOMERS
Notice to Victorian Customers from the Victorian Plumbing Industry Commission. This water heater must be
installed by a licensed person as required by the Victorian Building Act 1993.
Only a licensed person will give you a Compliance Certificate, showing that the work complies with all the
relevant Standards. Only a licensed person will have insurance protecting their workmanship for 6 years. Make
sure you use a licensed person to install this water heater and ask for your Compliance Certificate.
DOES THE WATER CHEMISTRY AFFECT THE WATER HEATER?
The water heater is suitable for most public water supplies, however some water chemistries may have
detrimental effects on the water heater, its components and fittings. Refer to
If you are in a known harsh water area or you are not sure of your water chemistry, have your water checked
against the conditions described on page
HOW LONG WILL THE WATER HEATER LAST?
The water heater is supported by a manufacturer's warranty
that will affect the length of service the water heater will provide. These include but are not limited to the water
chemistry, the water pressure, the water temperature (inlet and outlet) and the water usage pattern. Refer to
"Precautions"
on page 6.
shown on pages 13 to 18. The water heater must be installed:
10.
ABOUT YOUR WATER HEATER
"Water Supplies"
(refer to page 27). There are a number of factors
9
on page 10.