Table of Contents
Advertisement
CONTROLS AND CONNECTIONS
3.1.2 FireControl Master Section
The Master Section is always visible and gives you control over the FireStudio Project's outputs' source and
level as well as the Sample Rate and Buffer Size of the FireStudio drivers.
Output Select Section
•
Output Select Buttons
•
Mixer Toggle Buttons
•
Post Fader Output Meters
Hardware Settings Section
•
Sample Rate Selector
•
Buffer Size Selector
•
Clock Source Selector
•
Resizing Corner
Changes the Output Mixer displayed
The FireControl has five output mixes – one for each of the
FireStudio Project's five outputs.
Enables or disables the associated Output's mixer
When set to 'PlayBack', the output pair's DAW playback
outputs are routed directly to it.
Displays the output level of each stereo pair
These meter post fader levels, which means they represent
the actual audio output levels of your FireStudio Project.
Changes FireStudio Project Sample Rate
A Higher Sample Rate increases frequency range and sonic
accuracy but also increases recorded audio file sizes.
Changes the FireStudio Project Buffer Size
This selector is not present in Mac OS X.
A large buffer increases latency but is more stable.
Changes the FireStudio Project Clock Source
The 'S/PDIF' option is used to slave the FireStudio
Project to an external device via S/PDIF.
Resizes the width of the FireControl
Click and drag the bottom right corner of the FireControl
to resize its width on your screen and increase / decrease
the number of channels visible in the Mixer.
17 | PreSonus 2007
Advertisement
Table of Contents
