Connections And Controls; Controls - PRESONUS FaderPort 8 Quick Start Manual

3

Connections and Controls

3.1

Controls

3 Connections and Controls
3.1 Controls
native-support DAW applications is available at www.presonus.com.
This mode can also be used to create your own custom MIDI template.
See the FaderPort 8 Owner's Manual for more information.
• Mackie Control. Select Mackie Control to use your FaderPort 8 as a Mackie
Control device in your favorite DAWs (Cubase, Live, Logic, Nuendo, Sonar, etc.)
• HUI. Select HUI to use your FaderPort 8 as a HUI emulation device.
This mode of operation is recommended for use with Pro Tools.
To select your operation mode, simply press the Select button below it. Once
you have set the operation mode, your FaderPort 8 will retain this information.
If you would like to change the mode at any point, simply power on the unit while
holding down the first two Select buttons.
Automation Controls. Use these buttons to access different automation modes.
Hold shift to access the alternate functions labeled below each button.
Faderport 8
Quick Start Guide
3