Getting Started; Open The Box; Required Tools - Precor EXPERIENCE STRENGTHTM C-LINE CW34871-101 User Manual

Getting Started

Note: Assemble the weight stack shroud and bottle holder/accessory
tray after the equipment is positioned in the facility.
Assembly takes about 15 minutes to complete. If this is the first time
you have assembled this type of equipment, allow more time.

Open the Box

Open the box and remove the packing materials.
Before you begin installing the weight stack shroud assembly, verify
that you have received the following parts:
For Weight Stack Shroud Assembly
One front shroud assembly (CW34005)
One pulley cover (CW34012)
One lower left corner cover (CW34343)
One lower right corner cover (CW34343)
One pulley plug cover (CW34013)
One lower middle cover (CW33945)
One lower back cover (CW33944)
One upper back cover (CW34375)
One top cover (CW33947)
One adjustable foot (CW39916-102)
One foot cover with 75-degree upper opening (front, CW34061-103;
back, CW34061-104)
Two #8 x 1 " Phillips-head self-tapping screws
Abdominal Assembly and Delivery Guide: Getting Started
Ten "- 20 buttonhead screws
Two #8 x " Phillips-head self-tapping screws
For Attaching Bottle Holder/Accessory Tray
One bottle holder/accessory tray (CW34368)
One U-shaped bottle holder bracket (CW34364)
Two #8 - 32 machine screws
Two custom bolts
Two lock washers
Two flat washers
Two " - 16 low head bolts

Required Tools

One " hex key
One " hex key
One " hex key
One " socket wrench
One " open-end or box-end wrench
One 1"open-end or box-end wrench
One #2 Phillips screwdriver
Caution: Do not use power tools to tighten screws attaching the weight
stack shroud components. Using power tools may void the Precor
warranty.
2