Precor Cycles Integrated LCD Screen Option none Assembly Instructions Manual page 9

Cardio Theater Integrated Bracket Assembly Instructions
9. Align the mounting holes.
Ask your assistant to slide the bracket
assembly to the inside of the upright supports
and align the mounting holes.
Important: Continue feeding the remaining
cable so that no cable protrudes or gets
pinched while mounting the bracket.
10. Replace the fasteners.
Use a hex key to replace the four screws and
washers removed in step 6. For alignment
purposes, tighten the rear two screws first.
Wrench tighten the remaining two fasteners so
that the display console and bracket assembly
are securely attached to the upright supports on
the treadmill.
Install the Bracket Assembly
9
Display console
10
Display console
Tighten rear two
screws first.
Bracket
assembly
Left upright
support
Bracket
assembly
Left upright
support
page 9