Precor Cycles Integrated LCD Screen Option none Assembly Instructions Manual page 11

Cardio Theater Integrated Bracket Assembly Instructions
6. Fully tighten the bottom two screws.
Use a Phillips-head screwdriver to fully tighten
the bottom two screws. Leave the top two
screws finger tight.
7. Connect the coaxial/power cable connectors to
the LCD Screen.
Attach the connectors—coaxial and power—to
the back of the LCD screen.
8. Feed the DVD connector back into the pivot
tube compartment so it is not hanging out. The
DVD Option is not available for the treadmill.
9. Connect the controller cable.
Attach it to the back of the LCD Screen. You will
hear a definite click as the connector snaps into
place inside its receptacle.
Note: For more information about cable
connections, see the Cardio Theater LCD
Screen manual.
Attach the LCD Screen
6
9
Controller
cable
7
Coaxial
cable
Controller
cable
Note: Feed the DVD connector back into the
8
pivot tube compartment so it is not hanging
out. The DVD Option is not available with the
treadmill.
Power
connector
DVD
connector
Pivot tube
page 11