Precor Cycles Integrated LCD Screen Option none Assembly Instructions Manual page 8

Cardio Theater Integrated Bracket Assembly Instructions
4. Attach the power extension cable to the power
connector.
5. Set the bracket assembly aside.
6. Remove the fasteners that secure the display
console to the treadmill.
Use a hex key to remove the four screws and
washers that secure the display console to the
upright supports on the treadmill. Keep the
washers on the screws and set them aside.
Important: Ask someone for help before
attempting the next step.
7. Position the bracket assembly.
Ask your assistant to lift the bracket assembly
and position it parallel along the back of the
display console.
8. Thread the coaxial/power cable through the left
upright support.
While your assistant holds the bracket
assembly, carefully lift the left side of the
display console to expose the slot at the
bottom edge of the console. Thread the coaxial/
power cable with its two connectors (and power
extension cable) through the slot and down into
the left upright support. Continue feeding
the cable through the upright support until both
cable connectors exit the opening at the base.
Install the Bracket Assembly
4
Power
connector
Power extension
cable
7
Display console
6
Display console
Upright support
8
Display console
Bracket
assembly
Coaxial/
power
cable
Left upright
support
page 8