Dodge Journey 2017 User Manual page 40

G E T T I N G S T A R T E D
2. Pull the release loop forward to release the latch and seat cushion.
3. Lift the seat cushion up and push back to lock it in the booster seat position.
4. Place the child upright in the seat with
their back firmly against the seatback.
5. Grasp the latch plate and pull out the
seat belt.
6. Slide the latch plate up the webbing as
far as necessary to allow the seat belt to
go around the child's lap.
NOTE:
The lap portion of the seat belt should be
low on the hips and as snug as possible.
7. Once the seat belt is long enough to fit
properly, insert the latch plate into the
buckle until you hear a "click."
8. To remove the slack from the lap belt,
pull upward on the shoulder portion of the seat belt.
9. To release the seat belt, push the red button on the buckle.
Securely lock the seat cushion into position before using the seat. Otherwise, the seat
will not provide the proper stability for child seats and/or passengers. An improperly
latched seat cushion could cause serious injury or death.
38
WARNING!
Release Loop
Booster Seat