Dodge Journey 2017 User Manual page 39

Hide thumbs Also See for Journey 2017:
Table of Contents

Advertisement

• Improper installation can lead to failure of an infant or child restraint. It could come
loose in a collision. The child could be badly injured or killed. Follow the child
restraint manufacturer's directions exactly when installing an infant or child re-
straint.
• After a child restraint is installed in the vehicle, do not move the vehicle seat forward
or rearward because it can loosen the child restraint attachments. Remove the child
restraint before adjusting the vehicle seat position. When the vehicle seat has been
adjusted, reinstall the child restraint.
• When your child restraint is not in use, secure it in the vehicle with the seat belt or
LATCH anchorages, or remove it from the vehicle. Do not leave it loose in the vehicle.
In a sudden stop or accident, it could strike the occupants or seatbacks and cause
serious personal injury.
Integrated Child Booster Seat — If Equipped
The Integrated Child Booster Seat is located in each outboard second-row passenger seat.
DEATH or SERIOUS INJURY can occur,
• Follow all instructions on the child restraint and in the vehicle's owner's manual.
• The second row bench with Integrated Child Booster Seat must remain in the full rear
position during use.
• Use only with children who weigh between 48 and 85 pounds (22 and 29 kg) and
whose height is between 47 and 57 in (119 and 145 cm).
To position a child into the Integrated Child Booster Seat follow these steps:
1. Slide the second row seat to the full rear position to use the Integrated Child Booster
Seat.
NOTE:
The second row bench with Integrated Child Booster Seat must remain in the full rear
position during use.
G E T T I N G S T A R T E D
WARNING!
WARNING!
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents