Dodge Journey 2017 User Manual page 13

NOTE:
• If "Unlock All Doors 1st Press" is programmed, all doors will unlock when you grab hold
of the front driver's door handle. To select between "Unlock Driver Door 1st Press" and
"Unlock All Doors 1st Press," refer to the "Uconnect Settings" in your vehicle's
Owner's Manual on the DVD or "Programmable Features" in this guide for further
information.
• If "Unlock All Doors 1st Press" is programmed, all doors and liftgate will unlock when
you push the liftgate button. If "Unlock Driver Door 1st Press" is programmed, only the
liftgate will unlock when you push the liftgate button. To select between "Unlock Driver
Door 1st Press" and "Unlock All Doors 1st Press," refer to the "Uconnect Settings" in
your vehicle's Owner's Manual on the DVD or "Programmable Features" in this guide
for further information.
• If a key fob is detected in the vehicle when locking the vehicle using the power door
lock switch, the doors and liftgate will unlock and the horn will chirp three times. On
the third attempt, your key fob can be locked inside the vehicle.
• After pushing the Keyless Enter-N-Go lock button, you must wait two seconds before
you can lock or unlock the vehicle using the door handle. This is done to allow you to
check if the vehicle is locked by pulling the door handle without the vehicle reacting
and unlocking.
Lock Or Unlock The Liftgate:
With a valid Keyless Enter-N-Go key fob within 5 feet (1.5 meters) of the liftgate, push the
electronic liftgate lock/unlock pad located to the left of the liftgate handle to unlock the
liftgate. Push the button a second time to lock the liftgate.
NOTE:
Refer to your Owner's Manual on the DVD for further information.
G E T T I N G S T A R T E D
1 — Electronic Liftgate Lock/Unlock Pad
11