Hawking HPOW5CM User Manual page 68

To enable roaming between multiple AP devices, the first AP must key in the MAC address of the second
AP and vice versa. The NAS Identifier and 128-bit key should be identical on both Aps. This will enable
device roaming between both APs.
Mac Address:
NAS Identifier:
128-bit Key:
R0 Key Holder List
After setting up R0 Key Holder, the information will appear on this list.
R1 Key Holder List:
Enter a unified set of R1 Key Holder Identification certification.
Administrators must enter the MAC address of the other AP
Enter 1-48 octets of network domain name
Enter shared key
67