Dodge Durango 2016 User Manual page 36

G E T T I N G S T A R T E D
A recall can be cancelled by pushing any of the MEMORY buttons during a recall (S, 1, or
2). When a recall is cancelled, the driver's seat, the power pedals (if equipped), and the
power tilt and telescopic steering column (if equipped) stop moving. A delay of one
second will occur before another recall can be selected.
Easy Entry/Exit Seat
This feature provides automatic driver seat positioning to enhance driver mobility when
entering and exiting the vehicle.
The distance the driver seat moves depends on where you have the driver seat positioned
when you remove the Key Fob from the ignition (or change the ignition to OFF, for vehicles
equipped with Keyless Enter-N-Go).
• When you remove the Key Fob from the ignition (or change the ignition to OFF, for
vehicles equipped with Keyless Enter-N-Go), the driver seat will move about 2.4 inches
(60 mm) rearward if the driver seat position is greater than or equal to 2.7 inches (67.7
mm) forward of the rear stop. The seat will return to its previously set position when you
place the ignition into the ACC or RUN position.
• When you remove the Key Fob from the ignition (or change the ignition to OFF, for
vehicles equipped with Keyless Enter-N-Go), the driver seat will move to a position 0.3
inches (7.7 mm) forward of the rear stop if the driver seat position is between 0.9
inches and 2.7 inches (22.7 mm and 67.7 mm) forward of the rear stop. The seat will
return to its previously set position when you place the ignition to the ACC or RUN
position.
• The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than
0.9 inches (22.7 mm) forward of the rear stop. At this position, there is no benefit to the
driver by moving the seat for Easy Exit or Easy Entry.
Each stored memory setting will have an associated Easy Entry and Easy Exit position.
NOTE:
The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory.
The Easy Entry/Exit feature is enabled (or later disabled) through the programmable
features in the Uconnect system. Refer to "Uconnect Settings/Customer Programmable
Features" in "Understanding Your Instrument Panel" in the Owner's Manual on the DVD
for further information.
34