Real-Time Traffic Report - Mercedes-Benz COMAND Supplement Manual

Real-time traffic reports
78
Displaying real-time traffic reports
Starting a search for traffic reports
To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the controller.
X
To select Traffic Traffic: turn and press the con-
X
troller.
If satellite signals cannot be received or there
are no traffic reports, you will see a message
to this effect.
To close the report: press the controller.
X
Traffic symbol information
: Affected roads with indication of direction
Symbol for report type, e.g. traffic flow mes-
;
sage
To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the controller.
X
To select Traffic Traffic: turn and press the con-
X
troller.
To select Traffic Symbol Traffic Symbol Information
X
turn and press the controller.
The map appears and shows the available
traffic information as icons. The first traffic
information is highlighted.
To highlight additional traffic symbols, select
X
Next Next
To move the map: select
X
You can move the map to enable further traf-
fic information to be displayed.
You can have the traffic report relevant to a traf-
fic icon shown.
To select
X
troller.
The report shows the following information:
State/province, road and display of the affec-
R
ted direction
Section of the road to which the traffic report
R
applies
Traffic icon and traffic report
R
To close the detailed display: press the
X
% button.
Displaying reports on the route
The function is only available while route guid-
ance is active. It shows the available traffic
reports affecting the current route.
Information:
If there are no reports for the route or the func-
tion is not supported in the selected language:
the Messages Messages On On Route
cannot be selected.
or Previous. Previous
Map. Map
Details: turn and press the con- Details
Route menu item is gray and