Playback Options - Mercedes-Benz COMAND Supplement Manual

®
Bluetooth audio mode
156
i
During rapid scrolling, track names are not
displayed but only Track+1, Track+2, etc. (or
Track-1, Track-2, etc.). There are no playback
times shown for tracks that have been played.
This is available as an optional function start-
ing with AVRCP Version 1.3.

Playback options

General notes
®
If the Bluetooth audio device supports the cor-
responding function, the following options are
available:
Normal Track Sequence Normal Track Sequence: the tracks are
R
played in the normal order (e.g. track 1, 2, 3
etc.).
Audio data playback is determined by the
order in which the tracks are written to the
data medium. Alphabetical order is the most
common. Once all the tracks in a folder have
been played, the tracks in the next folder are
played.
Random Track Random Track List List: the current track list is
R
played in random order (e.g. 3, 8, 5 etc.).
Random Random Medium Medium: all tracks on the data
R
medium are played in random order (e.g.
track 3, 8, 5 etc.).
Playback options are optional functions and
are not, or only partially, supported by Blue-
tooth ® audio devices.
Selecting the playback option
Slide 6 the controller in the Bluetooth
X
audio basic display (
To select Options Options: turn and press the con-
X
troller.
Select Playback Mode Playback
X
A # dot indicates the current setting.
Select the desired option.
X
If you select Random Track Random Track List
sponding message appears in the display or
selection window.
®
page 153).
Y
Mode.
List, a corre-
Increasing the volume in the multime-
dia system
Slide 6 the controller in the Bluetooth
X
audio basic display ( page 153).
Y
To select Options Options: turn and press the con-
X
troller.
To select Volume: turn and press the control- Volume
X
ler.
A menu appears. The # dot indicates the cur-
rent setting.
Select Standard Standard or Boost. Boost
X
i
If play back on the Bluetooth
is too quiet, the Boost Boost function may be used.
It is recommended, however, that you
increase the volume on the Bluetooth
player directly.
Reconnecting a Bluetooth
device
®
The Bluetooth audio profiles are connected
automatically under the following circumstan-
ces:
one of the last two mobile phones to have
R
been connected has also been used as a Blue-
®
tooth audio player (if the function is suppor-
ted by the mobile phone).
the mobile phone is automatically connected.
R
The Bluetooth ® audio player is then connec-
ted.
i
For an automatic connection with the mul-
timedia system, the mobile phone must be
within range.
®
For most Bluetooth audio devices, the "auto-
matic connection" must be activated by tick-
ing a box. Depending on the device used, this
prompt often occurs during authorization (see
the manufacturer's operating instructions).
If the No Bluetooth Audio Device Connec‐ No Bluetooth Audio Device Connec‐
ted ted message appears, you have two options to
®
reconnect the Bluetooth
Option 1:
To confirm the Connect Connect Last
X
message in the basic display: press the con-
troller.
If the multimedia system can locate the Blue-
®
tooth audio device, it will be connected and
start playing.
®
®
audio player
®
audio
®
audio
audio device.
Last Used Used Player Player