Category - Mercedes-Benz COMAND Supplement Manual

Destination entry
62
Selecting a POI category
Select a category or one of the searches listed in the table.
X
The G symbol after an entry shows that further categories are available.
Select a sub-category.
X
The search for POIs starts.
If route guidance is active, first define the position for the POI search (
If no route guidance is active, the POI search covers a 240 mile (400 km) radius around the current
vehicle position.
Once the search is completed, the POI list is displayed.
The search results display the following information:
an arrow that shows the linear direction to the POI (search around vehicle position)
R
the linear distance to the POI
R
the name of the POI
R
Select a point of interest (
X
The complete address of the POI is shown.
Selection
Search By Name Search By Name
The search looks for all
POIs on the digital map or
around one of the three
previously specified posi-
tions ( page 62).
Y
Search By Phone Num‐ Search By Phone Num‐
ber ber
All POIs with a telephone
number can be selected.
Mercedes-Benz Ser‐ Mercedes-Benz Ser‐
vice vice
The search looks for
authorized Mercedes-
Benz Centers.
Defining the position for the POI search
You can define where the POI search is to be carried out during active route guidance by selecting
Near Destination Near Destination
The POI search covers a 240 mi (400 km) radius around the selected position.
page 63).
Y
Instructions
To select Search By Name Search By
X
Select All POIs All POIs
X
The search for POIs starts.
To select Search By Phone Search By Phone Number
X
ler.
The search for POIs starts.
To select Mercedes-Benz Service Mercedes-Benz
X
The search for POIs starts.
or Along the Along the Route Route.
Y
Name: turn and press the controller.
or a position for the POI search.
Number: turn and press the control-
Service: turn and press the controller.
page 62).