Mercedes-Benz COMAND Supplement Manual page 75

lane recommendations with a lower boundary
line.
Highway information
Display mode
Requirement: the Highway Information Highway Information
content must be enabled (
While driving on the highway, gas stations, rest
stops, rest areas and highway exits are dis-
played along with their immediate distances
from the current vehicle position.
Calling up the selection mode
When highway information is displayed, slide
X
9 the controller.
The marker is on the highway information. The
associated position is highlighted on the map.
To select the desired rest stop/freeway
X
exit: turn and press the controller.
The available POIs are displayed.
Starting route guidance to a POI
X
map
page 83).
Y
Using the traffic jam function
Highway information enables the use of the traf-
fic jam function. The remaining route on the
highway in this case is blocked in the direction of
travel from the selected exit.
X
Route guidance
To select a POI: turn the controller and press
to confirm.
The POI details are displayed.
You can perform the following functions:
Store in the address book (
R
View on the map ( page 84)
R
Y
Call if a phone is connected and a phone
R
number is available ( page 98)
Y
Select for route guidance and calculate a
R
route to it ( page 59)
Y
To select Detour: turn and press the control- Detour
ler.
The traffic jam function appears
( page 76).
Y
73
page 80)
Y
Z