Table of Contents
Advertisement
INSTALLING AN ISOFIX CHILD CARSEAT
87) 88) 89) 90) 91)
The rear side seats of the vehicle are
equipped with ISOFIX attachments, for
fitting child restraint systems quickly,
simply and safely.
The ISOFIX system lets you install the
ISOFIX child restraining system without
using the car seat belts but connecting
them directly to the carseat with three
anchors in the car.
Traditional child restraint systems can be
fitted alongside ISOFIX child restraint
systems on different seats in the same
vehicle.
To install an ISOFIX child restraint
system, attach it to the two metal
anchors 1 fig. 133 which can be reached
lifting the doors 2 located behind the
cushion of the rear seat, in the point
where it meets the backrest, then fix the
upper hook (available with the child
restraint system) to the dedicated
anchor "top tether" 3 fig. 134 located
behind the seat headrest.
126
133
134
As an example, fig. 135 shows an
example of a Universal ISOFIX child
restraint system for weight group 1.
IMPORTANT The fig. 135 is indicative
and for assembly purposes only. Fit the
child restraint system according to the
instructions, which must be included.
135
06086S0009EM
NOTE When a Universal ISOFIX child
restraint system is used, only ECE R44
"ISOFIX Universal" (R44/03 or further
upgrades) type-approved child restraint
systems can be used (see fig. 136 ).
The other weight groups are covered by
specific ISOFIX child restraint systems,
which can be used only if specifically
tested for this vehicle (see list of vehicles
provided with the child restraint system).
06086S0005EM
136
06086S0006EM
06086S0007EM
Advertisement
Chapters
Table of Contents
